Acura SUV RDX (TC1/TC2, 2024–2025) Sticky Steering or Loss of Power Steering — Recalls

What this problem usually means

Two safety recalls cover third-generation RDX steering: 24V114 covers 2024 RDX, where the steering gearbox was not sealed or tightened properly, letting water in to corrode and bind the gears; 25V582 covers 2025 RDX, where electric power steering software can enter a failsafe mode and cut assist. Both can leave the wheel suddenly heavy or sticky at speed; remedies are a free steering rack replacement (24V114) or EPS software update (25V582).

Likely causes

  1. Water ingress and corrosion in the steering gearbox (2024) → Shop the steering gearbox at Amazon
  2. EPS software calibration entering failsafe (2025)
  3. Binding steering gears from corrosion

How to fix it — step by step

  1. Note whether effort rises suddenly, the wheel sticks off-center, or an EPS warning appears
  2. Check your VIN at nhtsa.gov/recalls for campaigns 24V114 and 25V582 by model year
  3. Have the dealer perform the free remedy — rack replacement or software update
  4. Avoid high-speed driving until repaired if assist has cut out even once

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura SUV RDX (TC1/TC2, 2024–2025) problems

See all Acura RDX (TC1/TC2, 2024–2025) codes & guides →