Acura SUV MDX (YD3/4/7/YD8/9/YE1, 2014–2025) Vibration and Noise From Engine Mounts

What this problem usually means

CARiD's MDX review lists vibration from the active engine mounts as a recurring complaint across 2014–2025 models. The MDX's Variable Cylinder Management (VCM) system shuts down cylinders at cruise, and the fluid-filled active mounts that are supposed to absorb the resulting vibration collapse or leak with age, passing a drone and shake into the cabin — worst at highway cruise when VCM is active.

Likely causes

  1. Collapsed or leaking active engine mounts → Shop the active engine mounts at Amazon
  2. VCM cylinder deactivation vibration overwhelming worn mounts
  3. Mount vacuum/control faults on active mounts
  4. Exhaust or driveline vibration mistaken for mounts

How to fix it — step by step

  1. Note whether the vibration appears only at steady cruise (VCM active) and vanishes under acceleration
  2. Inspect the mounts for fluid leaks, cracks, and sagging
  3. Replace failed mounts with OEM active mounts — solid aftermarket mounts make VCM vibration worse
  4. If vibration persists with good mounts, have VCM operation and wheel balance checked

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura SUV MDX (YD3/4/7/YD8/9/YE1, 2014–2025) problems

See all Acura MDX (YD3/4/7/YD8/9/YE1, 2014–2025) codes & guides →