Acura SUV MDX (YD2, 2010–2013) Excessive Oil Consumption

What this problem usually means

CARiD's MDX review identifies excessive oil consumption as a known problem on 2010, 2011, and 2013 MDX models with the 3.7L V6: oil passes the piston rings fast enough that the level can drop dangerously between changes, and low oil then accelerates engine wear. Acura previously covered some engines under an extended warranty program, but that coverage has expired, so repairs are now on the owner.

Likely causes

  1. Worn or carbon-stuck piston rings → Shop the piston rings at Amazon
  2. Oil control ring clogging from extended oil intervals
  3. Valve stem seal wear at high mileage
  4. PCV system faults increasing consumption

How to fix it — step by step

  1. Start a consumption log: check the dipstick every fuel stop and record miles per quart
  2. Inspect for external leaks first so a leak is not mistaken for consumption
  3. Replace the PCV valve — cheap, and a stuck valve raises consumption → Shop the pcv valve at Amazon
  4. If use exceeds roughly a quart per 1,000 miles with no leaks, get a dealer or engine shop evaluation for ring work and weigh the cost against the vehicle's value

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura SUV MDX (YD2, 2010–2013) problems

See all Acura MDX (YD2, 2010–2013) codes & guides →