Acura SUV MDX (All models) Check Engine Light — Emissions System Warning

What this problem usually means

The MDX commonly displays an emissions system warning with the check engine light, a pattern CARiD's reliability review attributes most often to the evaporative emissions system: a loose or failed gas cap, a sticking canister purge valve, or EVAP leaks — with catalytic converter efficiency codes appearing on higher-mileage examples. Most cases are inexpensive; the light should still be read promptly because the same warning covers engine-damaging faults.

Likely causes

  1. Loose or worn fuel cap seal
  2. Sticking EVAP canister purge valve → Shop the canister purge valve at Amazon
  3. Cracked EVAP hoses or canister → Shop the evap canister at Amazon
  4. Aging catalytic converter (P0420/P0430)

How to fix it — step by step

  1. Tighten the fuel cap until it clicks and drive several trips — a cap code clears itself if that was it → Shop the fuel cap at Amazon
  2. Read the code with a scanner and note whether it is an EVAP leak, purge fault, or catalyst code
  3. Smoke-test the EVAP system if the leak code returns with a good cap
  4. Replace the purge valve or cap as indicated before condemning the catalytic converter

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura SUV MDX (All models) problems

See all Acura MDX (All models) codes & guides →