Acura Sedan TLX (UB5/UB6/UB7, 2021–2023) Fuel Leak at the Filler Neck — Recall
What this problem usually means
Safety recall 24V950 covers a small run of 2021–2023 TLX models — just 167 vehicles: an incomplete weld where the fuel filler neck joins the fuel tank can separate and leak fuel, a fire risk near ignition sources. Because the population is tiny, checking your VIN is the only way to know if your car is one of them.
Likely causes
- Incomplete weld at the filler neck-to-tank joint
- Weld separation from vibration and fuel slosh
- Resulting fuel seepage at the tank inlet
How to fix it — step by step
- Smell for raw fuel around the rear of the car and check for wetness near the tank → Shop the fuel tank at Amazon
- Check your VIN at nhtsa.gov/recalls for campaign 24V950
- If your car is included, park it outside away from structures until the dealer replaces the tank assembly free
- Do not drive a car that is actively dripping fuel — have it towed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the fuel tank.
Also tied to this fault: fuel filler neck - Shop at Amazon
Parts that commonly fix it
- fuel tank - Shop at Amazon
- fuel filler neck - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.