Acura Sedan TLX (UB1/UB2/UB3, 2019) Timing Belt Teeth Separation — Recall
What this problem usually means
Safety recall 19V298 covers 2019 TLX models with the V6 (and 2018–2019 MDX): the timing belt teeth can separate from the belt, causing the engine to stall or misfire and potentially destroying the interference engine — 93,946 vehicles recalled across the whole campaign, which covers other Honda and Acura V6 models beyond the TLX and MDX. The belt compound was contaminated during manufacturing.
Likely causes
- Contaminated timing belt tooth compound
- Tooth delamination under load
- Accelerated belt wear in hot conditions
How to fix it — step by step
- Treat any new misfire, stall, or flapping noise from the front of the engine as urgent
- Check your VIN at nhtsa.gov/recalls for campaign 19V298
- Have the dealer replace the timing belt free under the recall and inspect for engine damage → Shop the timing belt at Amazon
- If teeth have already separated, the engine needs a compression test before further driving
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the timing belt.
Shop the timing belt at Amazon
Also tied to this fault: timing belt tensioner - Shop at Amazon; water pump - Shop at Amazon
Parts that commonly fix it
- timing belt - Shop at Amazon
- timing belt tensioner - Shop at Amazon
- water pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.