Acura Sedan TLX (UB1/UB2/UB3, 2015–2020) Engine Stalls or Knocks — Connecting Rod Bearing Recall

What this problem usually means

Safety recall 23V751 covers 2015–2020 TLX models with the 3.5L V6 (and 2016–2020 MDX): debris left in the crankshaft during production can wear the connecting rod bearings, causing engine knock, stalling, loss of power, or complete engine failure — 248,999 vehicles were recalled across the whole campaign, which also covers the Honda Pilot, Ridgeline and Odyssey. This is a manufacturing defect, not a maintenance issue, and Honda's remedy is free inspection and repair or engine replacement.

Likely causes

  1. Manufacturing debris in the crankshaft journals from production → Shop the crankshaft at Amazon
  2. Progressive connecting rod bearing wear
  3. Loss of oil pressure to the rod bearings
  4. Bearing seizure at advanced wear

How to fix it — step by step

  1. Stop driving if you hear deep engine knock or the oil pressure light comes on — continued driving can destroy the engine
  2. Check your VIN at nhtsa.gov/recalls for campaign 23V751
  3. Book the free dealer inspection; the dealer will measure bearing clearance and repair or replace the engine as needed
  4. Keep the recall paperwork — a replaced engine under this campaign should be documented for resale

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura Sedan TLX (UB1/UB2/UB3, 2015–2020) problems

See all Acura TLX (UB1/UB2/UB3, 2015–2020) codes & guides →