Acura Hatchback Integra (DE5, 2023–2025) Coolant loss and misfiring from head gasket leak
What this problem usually means
In rare cases the 1.5L turbo's head gasket leaks between cylinders 2 and 3, per What-Breaks' Integra DE5 guide: the turbo engine was derived from a naturally aspirated design without strengthening the head for the higher firing pressure, leaving only a narrow gasket land between the middle cylinders. Symptoms are coolant loss, misfires and rough running rather than an external oil leak.
Likely causes
- Head gasket sealing failure between cylinders 2 and 3
- Narrow gasket land between the middle cylinders under turbo firing pressure
How to fix it — step by step
- Watch for coolant loss with no external leak, misfires on the middle cylinders, or white exhaust smoke
- Have a shop run a compression / leak-down test and a cooling system pressure test
- Confirm gasket failure between cylinders 2 and 3 before authorising a head removal → Shop the head gasket at Amazon
- Replace the head gasket with the head checked for flatness; this is internal engine work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the head gasket.
Parts that commonly fix it
- head gasket - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.